Jiffy Steamer J-4000H

Pro. J-4000H Hat Steamer

Hat manufactors, Theaters, Felt processing, for long daily use

Jiffy Steamer J-4000H for hats

The professional steamer for refreshing and shaping headgear

Areas of application (examples):

Hatter
Retail trade, specialist shops
Theatres, museums
Wigs and artificial hair manufactories
...

Use and advantages:

The professional steamers J-4000H for hats are specially designed for stretching, folding, smoothing, shrinking or simply shaping headgear.
Suitable for almost all hat materials and used worldwide by hatmakers and specialist shops.
The processing of straw and felt hats also works excellently.
As soon as steam flows out of the nozzle, you can start working with the steamer. Move the material up and down over the nozzle on the surface of the materials.
The steam penetrates deep into the fabric and smoothes out any wrinkles.
Odours are also neutralised in the fabrics.
When handling hot steam, the necessary care must always be taken. Keep children away from the steamer.
Suitable for continuous use (applies to all Jiffy steamers in the J-2/ J-2000/ J-4000 series).

Technical details:

Output: 1500 Watt
Heating time: approx. 15 min (preheating stage), steam generation then takes place in approx. 5 min.
Steam duration: approx. 1:45 hours per water tank filling (approx. 3.8 litres)
240 Volt, 50/60 Hertz, Cee plug (standard in Germany)
Circuit breaker with automatic switch-off in the event of overheating
Internal water tank/ Filling takes place directly at the unit/ Filling funnel available
Filling with tap water or distilled water (the latter slows down calcification)
Heat-resistant cabling in housing
Robust, coated cast aluminium housing
Mounting wrench

Device may only be operated in heated rooms.

Detailed German , English and Spanish operating instructions for easy installation and use as well as instructions for decalcification

Warranty and certificates:

3 years warranty
Handmade in the USA
Spare parts and repair service in our headquarters in Hamburg/ Germany

Scope of delivery:

The J-4000 models have an internal stainless steel water tank.
The housings are made of solid cast aluminum, coated with a protective alloy.
The J-4000H has a solid pre-assembled brass nozzle.
Funnel for water supply included in delivery.
Detailed German operating instructions for easy installation and use as well as instructions for descaling are available.

Dimensions and weight:

Box Dimensions (L x W x H): 51 x 31 x 35cm
Steamer Dimensions, assembled (L x W x H): 51 x 28 x 33cm
Weight with carton approx. 12 KG

Further information

Important note: Our steamers are not suitable for use as hay steamers. Under no circumstances may the appliances be used outdoors or in unheated rooms. There is no warranty claim in the event of non-compliance.