The Model J-4000Di is our heavy duty multi-purpose steamer recommended for commercial use. The J-4000Di has a 7 ½ foot flexible hose with 4 interchangeable steam heads consisting of a 9” bent aluminum pipe head attachment, “B” brush steam cleaning head, 6” wide metal steam head and a 12” wide carpet steam head. This steamer has a durable die cast aluminum outer housing unit with a built-in, easy-to-read water level sight gauge, 1500 watt incoloy heating element and a stainless steel internal steam chamber. The J-4000i offers convenient preheat and steam settings, which allows you to have steam on demand. The unit takes 15 minutes to reach a PREHEAT temperature and then 5 more minutes to achieve full STEAM. The J-4000i will steam for 2 hours per filling.
Please note: The J-4000D, DM and J-4000Di are not useable for steaming Clothes
Power 1500 Watt
Heating time approx. 20 min
Approx. 2 hours steamen per water tank filling (approx. 3.8 litres)
220/ 240 Volt, 50/60 Hertz, Cee Schuko plug (standard in Germany)
Circuit breaker with automatic switch-off on overheating (unit can be switched on again after cooling down)
Internal water tank/ filling is carried out directly on the unit/ filling funnel included in delivery
Filling with tap water or distilled water (slows down calcification)
Heat resistant cabling in the housing
Robust coated aluminium housing
4-part stable suspension rod set
360 degree swivel castors for best mobility
Mounting key (fixed with magnet under the steamer)
Detailed German operating instructions for easy installation
Carton dimensions (lxwxh): 50x30x32cm
Dimensions steamer assembled (lxwxh): 50x28x185cm
Weight in carton ca.13 KG
Hose length with nozzle approx. 230 cm
3 years warranty
Made in the USA
Handling of the steamer:
Fill the water tank with the funnel
(observe the filling level in the window on the side of the steamer, 3.8L in total)
Carefully screw together the rod set and fix it on the steamer (tool with magnet fixed under the device)
Mount steam nozzle with hose on the steamer
Switch on the steamer and set the switch to "Steam
After about 20 min the steamer is ready for use
As soon as steam comes out of the nozzle, slide the nozzle outside or inside over the fabric from top to bottom
Please always make sure that the hose is straight.
Sagging causes bubbling, caused by condensation in the hose.
This can result in increased water droplets escaping from the nozzle.
The steam penetrates deep into the fabric and smoothes all wrinkles
Even odours are neutralised
Not all fabrics are suitable for steaming (e.g. mohair wool), for some textiles ironing is more suitable.
If you are unsure whether the fabric can be steamed, try it out on an inconspicuous place
Please be careful when handling the hot steam, keep children away from the steamer